
B&V Marine Langkawi
Most Affordable Marine in Malaysia
Located on the small island of Malaysia called Langkawi - we provide great and non-expensive service compared to our competitors.
Learn moreOur Services
Why Choose Us
Price Lists
General
Special Rate · until October 31, 2026
As of August 1, 2026
- Slip In / Slip Outft
MYR
18.00ft - Long term hard stand
- More than 180 days
- Paid 120 days in advanceft / dayMYR
1.00ft / day Promo
Long term hard stand
- More than 90 days
- Paid 90 days in advanceft / dayMYR
1.251.20ft / dayPromo
Short term hard stand
- Up to 90 days A/C.
- Paid X days in advance
- Negotiable down to MYR 1.00 depending on provided workft / dayMYR
1.401.25ft / dayPromo
Short term hard stand
- Up to 30 days A/C.
- Paid X days in advance
- Negotiable down to MYR 1.00 depending on provided workft / dayMYR
1.601.35ft / dayPromo
Short term hard stand
- Up to 20 days A/C.
- Paid X days in advanceft / dayMYR
1.801.50ft / dayPromo
Short term hard stand
- Up to 10 days A/C.
- Paid X days in advanceft / dayMYR
2.001.60ft / day- Additional boat standpiece / month
MYR
25.00piece / month - Laddermonth
MYR
25.00month - Electricity
- without Air ConditioningmonthMYR
80.00month - Electricity
- with Air ConditioningmonthMYR
180.00month - Watermonth
MYR
40.00month - Pressure Washuse
MYR
200.00use - Scaffoldingweek
MYR
25.00week - Rental deposit
MYR
150.00 - Travel Lift Hang-in-Sling
- first 2 hoursfirst 2 hoursMYR
650.00first 2 hours - Travel Lift Hang-in-Sling
- more than 2 hoursconsequent hourMYR
100.00consequent hour - Step / Unstep Mast
- Less than 40ftMYR
800.00 - Step / Unstep Mast
- More than 40ftMYR
1000.00
Additional information
- Exchange rate may be changed at any time prior notice:
- Engineering, engine, gear box, electrical, AC & DC system, hydraulic system, plumbing system, fresh water & sea water system, building or repair.
- Welding, aluminum, stainless steel, steel.
- Painting, anti-fouling, hull, other, by spray or brush, preparation of the boat.
All prices are subject to change without prior notice.
Labour
As of September 27, 2026
- Steel Weldinghour
MYR
85.00hour - Stainless Steel Weldinghour
MYR
110.00hour - Electrical / Electronichour
MYR
150.00hour - Mechanicalhour
MYR
250.00hour - Carpenter
- depends if intricate cabinet workhourMYR
90.00-120.00hour - Rigging Turning and Machining
MYR
per request - Sand Blasting Inside
- grit prime and cleanup includedsq ftMYR
90.00sq ft - Sand Blasting Outside
- grit prime and cleanup includedsq ftMYR
70.00sq ft - General labor roller, painting, sanding etc.hour
MYR
70.00-85.00hour - Through hulls plumbing and fittinghour
MYR
70.00hour
All prices are subject to change without prior notice.
Paint
As of May 1, 2026
- MARINE STAR A BLUE5.0 LITRE (CAN)
MYR
525.005.0 LITRE (CAN) - RAVAX AF5.0 LITRE (CAN)
MYR
450.005.0 LITRE (CAN) - UNYMARINE HS WHITE5.0 LITRE (CAN)
MYR
400.005.0 LITRE (CAN) - UNYMARINE HS BLUE5.0 LITRE (CAN)
MYR
300.005.0 LITRE (CAN) - UHIFLOOR SC5.0 LITRE (CAN)
MYR
300.005.0 LITRE (CAN) - EP COAT THINNER S5.0 LITRE (CAN)
MYR
100.005.0 LITRE (CAN) - EPOXY THINNER A5.0 LITRE (CAN)
MYR
75.005.0 LITRE (CAN) - CR/ACRI THINNER A5.0 LITRE (CAN)
MYR
75.005.0 LITRE (CAN) - TFA 30 BLACK4.0 LITRE (CAN)
MYR
500.004.0 LITRE (CAN) - TFA 30 BLUE4.0 LITRE (CAN)
MYR
500.004.0 LITRE (CAN) - TFA 30 RED4.0 LITRE (CAN)
MYR
500.004.0 LITRE (CAN) - UMEGUARD SX BROWN4.0 LITRE (CAN)
MYR
225.004.0 LITRE (CAN) - UMEGUARD SX LIGHT GREY5.0 LITRE (CAN)
MYR
225.005.0 LITRE (CAN) - ALUMINUM PRIMER ALP5005.0 LITRE (CAN)
MYR
275.005.0 LITRE (CAN) - EPICON ZINC HB-25.0 LITRE (CAN)
MYR
475.005.0 LITRE (CAN) - INTERNATIONAL INTERSWIFT RED5.0 LITRE (CAN)
MYR
650.005.0 LITRE (CAN)
All prices are subject to change without prior notice.
What our customers say
Frequently asked questions
Planning to haul out or leave your boat in Langkawi? Here is what cruisers ask us most. Can’t find your answer? Get in touch.
Message us on WhatsApp (+6 017 697 2329) - the quickest way, we usually answer within minutes during working hours - or send the online form and we reply by email within one working day. Tell us your boat’s name and type, its length, beam and draft (and weight, if you know it), the dates you would like to haul out and go back in the water, and the work you need done. We will then confirm a slot and send you a quote for your boat.
Hardstand is charged per foot of boat length per day, and the daily rate goes down the longer you stay and the further in advance you pay. Slip in / slip out is charged per foot. The current rates are in the price list above.
Often, yes. The price list shows our standard rates, but the final price depends on your boat, how long it stays and how much work we do on it - the more work you give us, the better the rate we can offer (for example, short-term hardstand can come down to MYR 1.00 per foot per day*). Tell us what you need and we will put together a quote for your boat.* Based on our price list of 1 August 2026; rates may differ today - see the current price list.
Langkawi lies outside the typhoon belt - it doesn’t get tropical cyclones - which is why many cruisers leave their boats here for months at a time. Our yard is close to the island’s main customs port and is clean and quiet.
Toilets and showers, electricity (with or without air conditioning) and water, plus ladders, boat stands, scaffolding and a pressure wash. See the price list for what each one costs.
Antifouling and painting, sanding and polishing, welding in steel, stainless steel and aluminium, mechanical, electrical and electronic work, carpentry, rigging, sandblasting, through-hull plumbing, and stepping or unstepping masts. Tell us what your boat needs and we will quote for it.
Yes. We order from suppliers such as Port Supply and West Marine, with international delivery taking about a week. Langkawi is also a duty-free island, which helps keep the cost of parts down.
Many boats haul out during the south-west monsoon (roughly May to October) and cruise in the calmer north-east monsoon from October to April. We work all year round, so book early for the busiest months.
Yachts clear in and out at Kuah, visiting the Harbour Master, Customs and Immigration in that order. There are no clearance fees during normal working hours. Rules change from time to time, so check the latest requirements before you arrive.
Ready to bring your boat to Langkawi?
Tell us about your boat and the work it needs, and we will get back to you with a slot and a quote.





